How to Get Rid of Dust in Your iPhone Speakers

How to Get Rid of Dust in Your iPhone Speakers

How to Get Rid of Dust in Your iPhone Speakers

Do you have dust in your iPhone speaker? Don’t worry, it can easily be cleaned! This how-to guide will show you how to clean the speakers in an iPhone.

It might sound like a simple process, but there are a lot of different ways that people try and fail. If you’re not careful, you could cause more damage than good. Follow these steps carefully for help with how to clean iPhone speakers!

Best way to Clean iPhone Speakers

The iPhone speaker is one of the most sensitive components and can be easily damaged. Fortunately, there are a few easy ways to get rid of pesky dirt and grime that may have accumulated on or around your phone’s speaker without compromising it in any way.

Step 1: Scrubbing

People might think that a speaker is just some fancy piece of equipment and not have any idea as to what it should be cleaned.

However, speakers can gather all sorts of debris in them such as dust, pet hair or lint. If grime builds up over time then this will affect the quality of sound from your stereo system.

To keep your speakers clean follow these simple steps:

First use a soft-bristled toothbrush to gently brush off anything on top like dirt and crud before brushing their undersides using light circular motions. When you hear scratching sounds coming from inside the holes.

Never stick an instrument into one opening for very long. Because there are many wires under each port which could get damaged by too much pressure!

Step 2: Painter’s tape

You might not know that painter’s tape is actually a blue adhesive used for taping off areas during painting. It has an amazing property of picking up all the grime and bits that have accumulated in your iPhone speakers.

So you can get rid of it! All you need to do is tear off a small piece from the roll. Then wrap it around your index finger with its sticky side facing out.

Next slip over onto one speaker at a time on each side or top and bottom depending how much area needs cleaning. Just peel back any sections where dirt remains until clean again!

Step 3: Debris Out

Compressed air can help you clean your speakers! It is simply canned oxygen and has many uses.

To start, lay out your phone with the screen down. When using compressed air always read any instructions carefully as some warnings may apply.

Step 4: Use a cotton

1) Remove the cotton from one end of the cotton swab by pinching one end with your thumb and forefinger. Then pull your hands apart to remove the balled cotton. Once removed, discard it, you won’t need this part anymore!

2) Pinch that same “spool” again loosely now. Roll up some more loose threads onto its spindle-like head.

3) Feed a little further into the headphone jack (gently), and turn around once or twice inside there for good measure before you pull out completely.

4). This will also work on laptop jacks too if needed!

Step 5: Check Speaker

If you cannot hear sound from your iPhone or iPad, try adjusting the volume settings. Open up Settings and select Sounds.

Drag up on the Ringer And Alerts slider to increase the volume of vibration and ringtones. If they are too low for you to hear them clearly. If this doesn’t work, contact Apple’s support team who will be happy to help!

Contact Us

What do you think?

482 Points
Upvote Downvote

Written by admin

Leave a Reply

Your email address will not be published.

GIPHY App Key not set. Please check settings

Clean a Whiteboard with 4 Simple Steps

How to Clean a Whiteboard with 4 Simple Steps

A Guide on How to Increase Height

A Guide on How to Increase Height